GE Refrigerator Water Dispenser Not Working After Replacing Filter

There are many things to like about GE refrigerators. However, along with this you should also know when the time to replace their filters is. If you are bad at remembering things then you can check the indicator light to make sure that now is the time for replacement. But what if your GE refrigerator water dispenser stops working after replacing filters?

GE Refrigerator Water Dispenser not working after Replacing Filters – Why?

Your GE Refrigerator Water Dispenser Not Working After Replacing Filter due to the following reasons.

  • Filter or Water Supply Line Problem
  • Low Water Pressure
  • Frozen Water Tank
  • Faulty Water Inlet Valve
  • Water Leakage
  • Bad Dispenser Control Board

GE Refrigerator Water Dispenser not working after Replacing Filters – Fixes Explained!

There are several reasons that might contribute to the fact that your GE refrigerator water dispenser stops working even after filter replacement. Let me discuss various troubleshooting guides that might help you solve this issue.

GE Refrigerator Water Dispenser Not Working After Replacing Filter
GE Refrigerator Water Dispenser Not Working After Replacing Filter

Also Check: GE vs Samsung Refrigerator 6 Difference Which One is Better

Also Check: 4 Ways To Find Kenmore Refrigerator Size By Model Number

Also Check: GE Cafe Refrigerator Problems [6 Fixation Solved] 2024

Also Check: My LG Refrigerator Is making a Knocking Noise [Fixes 2024] 

Also Check: Fridge Making Noise When Door Closed [9 Issues Fixation] 

  1. Check the New Filters for Possible Issues

Sometimes there are a few things that might go wrong during the installation process or you could have gotten the purchase wrong. If this happens, your water dispenser will not work.

Check for the following issues.

  • Wrong Type

There are five types of GE refrigerator filters, which are as follows.






You need to buy new filters having the exact same model like the old ones otherwise your dispenser won’t work.

Fix Method

If you have already installed the wrong filter type then you will have to replace them again with the correct ones.

  • Non-Genuine Filters

There are many non-genuine filters floating in the market. GE specifically warns us about them because despite being cheaper, they often turn out to be defective.

Fix Method

To check whether the filters are genuine or not, examine two things; refrigerator displaying leak detected or replace water filter soon after the replacement means the filters might be faulty. Replace these fake filters with the genuine ones.

  • Wrong Installation

Out of all, GE water filters have the easiest installation to follow. Still some people fail to do this because of many reasons like not paying enough attention towards the instructions. If the installation isn’t done right then unfortunately, your water dispenser will not work.

Fix Method

After installing the water filters if you happen to see the word ‘back’ then it means the installation hasn’t gone correct. To solve this, you need to take out the filters and reverse them.

  • Filter Damage during the Installation

One of the issues might be that you unintentionally damaged the filters during the installation process. This happens when you try to forcefully install the filters. Defective or damaged filters will prevent your water dispenser from working properly.

Fix Method

Replace the damaged filters with the new ones or the ones which aren’t damaged.

  1. Check Water Supply Line for Issues

It might happen sometimes that due to various blockages the water might not reach the dispenser making it not to work. This issue includes the following reasons.

  • Water Supply Might not be ON

If the water supply reaching your dispenser isn’t turned ON then it is obvious that the dispenser won’t work.

Fix Method

Make sure the water supply to your water dispenser is turned ON.

  • Frozen Water Supply Line

The recommended temperature range for GE freezers is 0-10 degrees Fahrenheit. Water supply tube will probably freeze when the temperature drops below 0 degrees Fahrenheit. If this happens, the water won’t probably get to the dispenser.

Fix Method

Check the freezer temperature and don’t let it drop below 0 degrees Fahrenheit. If the water supply tube is already frozen then you can defrost the refrigerator to resolve this issue.

  • Trapped Air

Trapped air in the water supply line can also make your water dispenser not work because no amount of water will be reaching it.

Fix Method

Keep pressing the dispenser lever for about 5 minutes so that the trapped air can purge out.

  1. Measure Home Water Pressure

You need to make sure that the water pressure at your home is at least 20 psi. If the pressure is lower than this then the dispenser will not receive water. Use a water pressure gauge for measuring the water pressure.

Fix Method

Raise the water pressure if it is below 20 psi. But make sure not to increase the pressure more than 120 psi. Adjust the main valve, remove the possible kinks present in the water line and shut off other supply lines when they are not in use.

  1. Inspect Water Tank for Freezing

Just behind the back of your refrigerator’s vegetable bin, there is a water tank. If this tank is frozen then the water will not reach your water dispenser.

Fix Method

Make sure not to overload the compartment by placing extra items. Moreover, keep the refrigerator’s temperature between 37 – 42 degrees Fahrenheit.

  1. Examine the Water Inlet Valve

The most important component that plays a role in allowing water to reach the dispenser is none other than a water inlet valve. However, if it is defective then unfortunately, the water will not reach the dispenser.

Fix Method

Take a multimeter and test the valve. If it shows continuity then it means it is working fine otherwise chances are that it has become faulty.

  1. Check the Switches for Fault

The two switches; dispenser switch and door switch might be the real culprit behind this problem. If any of these switches are defective or faulty then water will unlikely to reach the dispenser.

Fix Method

Again use a multimeter to check the continuity of these switches. In case no continuity is shown, make a quick replacement for faulty switches.

  1. Water Leakage

GE refrigerator water dispensers are very sensitive to changes and because of this if they detect some change they will probably shut off. One of the reasons for this is the defrost drain blocking the freezer.

Fix Method

Dealing with this issue is purely a technician’s job. So call a technician to get this issue resolved.

  1. Replace the Dispenser’s Control Board

If none of the above fixes worked out for you then you have to try this last fix. Check the dispenser’s control board and look for possible damages. In case it is faulty, you have to get it replaced. But this should be your last step to conduct, before applying this fix you must go through the above 7 mentioned fixes.

GE Refrigerator Water Dispenser Not Working After Replacing Filter
GE Refrigerator Water Dispenser Not Working After Replacing Filter


Also Check: Frigidaire Refrigerator Water Dispenser Slow [9 Fixes]

Also Check: GE Refrigerator Water Dispenser Not Working After Replacing Filter

Also Check: Samsung Twin Cooling Fridge Freezer Problems 2024

Also Check: GE Refrigerator Making Loud Humming Noise [5 Fixation]

Also Check: Kenmore Refrigerator Ice Maker Troubleshooting 2024

Also Check: GE Profile Refrigerator Ice Maker Reset [10 Problems]

Frequently Asked Questions

Why did my GE refrigerator stop dispensing water?

A – There are many reasons due to which your GE refrigerator has stopped dispensing water. The reasons include: clogged filters, faulty inlet valves, installation errors, and defective water lines.

Why did my water dispenser stop working?

A – The most common reason for this problem might be the presence of clogged filters. Water filters need to be replaced after every 6 months so make sure you do it.

The End:

It is really frustrating to have your water dispenser not working properly. The reasons might be different for everyone so I have mentioned all of the possible ones. Make sure to carry them out properly in order to have your issue resolved.

Leave a Comment