Whirlpool Microwave Error Codes [Fixation 2024]

Microwave ovens play a very important role especially in the holiday season. There are some peak times when the microwave ovens become a priority to use. For instance, having Thanksgiving or Christmas around the corner might make things a bit hectic.

Imagine opening your oven to prepare Turkey and as soon as you try to turn on the timer you get to know that it isn’t working anymore. What to do now? It is no new news that microwave ovens hold a very important place when we talk about kitchen appliances. So today, I will be discussing Whirlpool Microwave Error Codes which will help you in dealing with various types of errors.

What are Whirlpool Microwave Error Codes?

If you don’t know what error codes actually are and what their usage is then you will simply look at them as random numbers and letters. But this is not the case. Each and every code represents a specific problem through which you can bring back your oven into working.

While most of the errors can be solved easily without the interference of professionals or experts. However, there are some errors which you cannot solve until and unless any professional is involved in it. Well, don’t worry as I will be guiding you on how to distinguish between these two types of errors.

Type 1 – Control Board and Keypad Malfunction

The control board and keypad malfunction error codes are as follows.

Error Codes

F1, F5, F7, F8, F2-E0, and F2-E5 are the error codes included in this category.

Meaning of the Code

The meaning of this code is basically related to the defective or stuck keypad along with any control-related part failure.

Possible Part Failures

Possible part failures could be keypad, control panel or electronic control.

Solution

Disconnect the main power supply to the oven by turning OFF the circuit breaker or fuse for at least 60 seconds. With the oven being off, inspect the connections of all electronic components including control panel, main board and keypad. Now restore the power that reaches the oven and press Cancel. Unfortunately, if the error code comes back after 1 minute again then it is time to replace the keypad. Even after the keypad replacement the problem still exists then go for the replacement of the main control board.

Whirlpool Microwave Error Codes
Whirlpool Microwave Error Codes

Also Check: Whirlpool Microwave Display not Working

Type 2 – Temperature Sensor Issues

The temperature sensor issues error codes are as follows.

Error Codes

F3, F4, F3-E1, F3-E2 and F3-E3 are the error codes included in this category.

Meaning of the Code

The meaning of this code is that the oven temperature sensor has failed.

Possible Part Failures

Possible part failures could be wire harness, temperature sensor or main control board.

Solution

Disconnect the main power supply to the oven by turning OFF the circuit breaker or fuse for at least 60 seconds. With the oven being off, check the temperature sensor along with the wire harness to make sure that no connections have been damaged or are loose. In case you see any visible physical damage then replace the damaged part. However, if there is no physical damage then use an ohmmeter to test the sensor. If all these things seem to be good and secure then you will need to replace the main control board.

Type 3 – Overheating Problems

The overheating problems error codes are as follows.

Error Codes

F9, and F5-E0 are the error codes included in this category.

Meaning of the Code

The meaning of this code is that the oven temperature is too high.

Possible Part Failures

Possible part failures could be temperature sensor, main control board or wire harness.

Solution

It is necessary for your oven to not exceed temperature above 575 degrees Fahrenheit in the Bake mode and 950 degrees Fahrenheit in the clean mode. If it does then unfortunately your unit will start giving the above mentioned error codes.

First turn off the power supply to the oven and inspect the connections present between control board, sensor and wire harnesses. If you see no visible damage in the parts plus all the connections have been secured then you need to replace either the sensor or main control board.

Type 4 – Door Lock Error

The door lock error codes are as follows.

Error Codes

F2, F3-E2, and F3-E3 are the error codes included in this category.

Meaning of the Code

The meaning of this code is related to oven door lock malfunctioning.

Possible Part Failures

Possible part failures could be door switch, door lock assembly and wire harness.

Solution

The first thing to do is inspect the door switch by using the oven’s interior light. Perform a little experiment, open and close the door to ensure that the light turns on when the door is opened and turns off when it is closed. If this doesn’t happen then replace the switch. Secondly, disconnect the main power and check for possible loose connections between wire harness and door lock assembly. In case you see no physical damage then you simply need to replace the door lock.

Extra Precautions

Make sure to keep your oven clean in order to avoid unnecessary repairs and fixes. Keeping your oven clean is the best action you can take to avoid future inconvenience. More importantly, not all Whirlpool oven error codes have straight-forward DIY solutions. Some of them require a professional or an expert to get the issue resolved.

Whirlpool Microwave Error Codes
Whirlpool Microwave Error Codes

Frequently Asked Questions

Q – What to do when the microwave says an error?

A – Before doing anything else, it is important to perform a simple reset first. You can do this by unplugging your microwave for about 60 seconds. After doing this if the error still exists then you can jump on to the next solutions.

Q – Is there a reset button for Whirlpool microwaves?

A – You can press the Cancel button to perform a reset.

The End:

It is important to have a little bit of knowledge when it comes to error codes. These error codes provide ease in figuring out the nature of the problem. Moreover, it will benefit you as well by expanding your knowledge set. Make sure to go through the article properly and thoroughly. 

Leave a Comment