Bosch Dishwasher No Lights on Control Panel [5 Reasons]

One day I went to my kitchen to turn ON my Bosch dishwasher. What I see is that there are no lights on the control panel and my dishwasher was also dead. You can imagine the situation of a person who has a whole pile of dirty plates and on top of it, his dishwasher is also not working. Well, that person was me.

If you have been the victim of a similar situation that Bosch Dishwasher No Lights on Control Panel then I can feel you. Such a panic situation makes it hard to focus on the solution part. Take my advice and relax for a bit. This issue can be resolved easily.

Bosch Dishwasher No Lights On Control Panel – Reasons and fixes

Follow my troubleshooting methods for  and see the magic yourself.

1. Power Supply Problem:

Inspecting the power supply for any potential problems should be your first step. In this case, you need to look for all the situations which involve power supply. There could be many reasons for it so don’t just stick to one.

Fix method

As there are multiple reasons for this problem, there will be multiple fixes too.

  • Resetting the circuit breaker

Firstly, reset the circuit breaker of your home. Make sure that the breaker which is responsible for providing power to all appliances is turned ON. If you want to reset it, follow the below steps.

  • Either remove the fuse from the box or flip the circuit breaker in OFF position
  • Wait for about 2 – 3 minutes
  • Bring back the circuit breaker in ON position or reinstall the fuse

Check if the dishwasher is working now or not.

Also Visit: Why Is My KitchenAid Dishwasher Beeping [9 Issues & Fixes]

Also Visit: GE Dishwasher Troubleshooting [7 Fixations of Problem] 2024

Also Visit: Whirlpool Dishwasher Diagnostic Mode [4 Methods]

Also Visit: Bosch Dishwasher cant Change Cycle [5 Things To Do]

Also Visit: Kitchenaid Dishwasher Not Spraying Water 2024

Also Visit: How to Reset a Bosch Dishwasher [Steps For Fixation 2024]

Also Visit: Frigidaire Gallery Dishwasher Error Codes [Fixation 2024] 

2. Loose Power Cord:

The whole working of your dishwasher depends on the power cord if it is its primary source to obtain power. However, if this power cord is loose or has become faulty due to any reason then your dishwasher won’t work.

There is an important point to note, many dishwashers don’t use a power cord. For instance, your dishwasher might use a power cord but your friend’s dishwasher doesn’t use one. So if there is a power cord, only then this problem will exist.

Fix method

After confirming that your dishwasher uses a power cord, you have to check the outlet in which it is plugged in. If it is faulty then call an electrician to fix it. Reset the outlet if the power cord is plugged into a GFI/GFCI outlet.

Lastly, if your dishwasher actively uses the wall-switch then you can check its power and ensure its proper working.

Bosch Dishwasher No Lights on Control Panel
Bosch Dishwasher No Lights on Control Panel

3. Power But No Light (Faulty Control Panel):

You are somewhere near the solution. Before your dishwasher was not getting any power as well as there were no lights on it. But now, there is power but the lights are still OFF. What to do? I recommend you to follow the below steps if the issue is not electricity-related.

  • Replace the control panel

Sometimes, instead of the whole unit being faulty it is the control panel which is faulty itself. If the power has been restored but still there are no lights then this indicates a damaged control panel.

Fix method

Check for rusting and loose wire connections. If you find any rust or corrosion then get rid of it. In case of faulty wires replace them and in case of loose wire connections tighten them. Unfortunately, if these solutions don’t work out for you then it is finally the time to replace the control panel. Find the right model for its replacement.

4. Damaged Control Board:

You have to think about every single possibility when dealing with a faulty electrical appliance. After thinking about the situation in which there could be a faulty control panel, there could be a damaged control board as well.

Don’t be too quick! First do the manual inspection. Look for frayed wires, loose wire connections, burnt parts etc. Along with this, check the connectors whether they are properly tightened or not. You will most commonly come across these issues because as you start using the appliance, these components will start becoming old due to their continuous use.

Fix method

If you couldn’t find any other possible fix for this issue then we recommend you to order a new board for smooth working of your dishwasher. Make sure the control board that you are ordering is of the same model as the previous one. If this is not the case then your dishwasher will most likely witness the compatibility issues.

Bosch Dishwasher No Lights on Control Panel
Bosch Dishwasher No Lights on Control Panel

5. Activated Child Lock:

A child lock is a protective mechanism that protects your dishwasher from the usage of children. This is useful because it will prevent outside interference. Moreover, your children will be restricted from interacting with the dishwasher. 

Fix method

You need to deactivate this lock in order for your dishwasher to work.

  • Locate the lock catch
  • To the right side, hold the lock catch
  • Make sure to press the lock catch in backward position

Congrats! The child lock is deactivated.

Also Visit: Bosch Dishwasher No Lights on Control Panel [5 Reasons]

Also Visit: KitchenAid Dishwasher Diagnostic Mode [6 Ways to Run]

Also Visit: Maytag Bravos XL Washer Troubleshooting [10 Fixations]

Also Visit: Miele Dishwasher Troubleshooting [Top 5 Fixations] 2024

Also Visit: Why Bosch Dishwasher Starts Then Stops [4 Reasons 2024]

Also Visit: Bosch Dishwasher Cycles Explained [Complete Guide 2024]

Frequently Asked Questions

Why is my Bosch dishwasher not displaying anything?

If your Bosch dishwasher is not displaying anything then you have to check the power supply. Any issues found in there will prevent the dishwasher from working. Moreover, it could be due to a faulty control board or the control panel. Troubleshoot these components and you will find your answer.

Is there any way to reset the control panel of my dishwasher?

Yes, you can definitely reset the control panel on your dishwasher. You simply have to keep pressing the power button for 3 – 5 seconds continuously. This will do a reset.

Why does my dishwasher suddenly have no power?

There could be a power supply issue if your dishwasher suddenly stops working. You can also blame other components but this is the primary thing to consider so make sure there aren’t such issues.


In a nutshell, if your dishwasher stops working and shows no lights then it is probably due to the presence of a faulty control board, faulty control panel, and loose wire connections etc. You need to be careful while inspecting the components. Don’t be too quick to judge a component, take your time and then perform further processing.

Leave a Comment