With the advancement in technology, everything has evolved. Whether it is your washer or AC unit, everything is built on the latest technology. But with ease comes difficulty too. The latest technology can become a hurdle for you to resolve certain errors.
Older errors were quite simple and easy to solve. But the latest errors demand sufficient knowledge and skills to get resolved. Let us talk about MCT washers, they are quite famous right? But they contain certain errors which create difficulty for the users. Today we will be discussing MCT washer problems along with their fixes so stay tuned!
Maytag Bravos MCT washer problems 2024
Some problems are easier to solve while others require adjusting, replacement or balancing. The common washer problems that you might come across are as follows.
- Washer won’t start
- Washer won’t agitate
- Washer won’t drain
- Washer won’t sense
- Washer won’t spin fast enough
- Washer won’t fill
- Washer won’t wash
- Washer stops working mid-cycle
- Washer won’t spin the clothes dry
Quick overview:
Some people might not like to get into much details but the others might want to. To resolve this conflict we will be addressing both the approaches so the guide becomes useful for both types of users.
| Problem | Cause | Fix |
| Washer won’t start | Inbound power failure
Blown thermal fuse Defective lid lock Defective main control |
Check whether the breaker, cord or outlet have gone faulty or not. In case of faulty components, get them replaced as soon as possible |
| Washer won’t agitate | Faulty agitate repair kit
Faulty drive belt Faulty door lock Faulty drive motor Faulty motor coupling Faulty agitator assembly Faulty control board |
Point out the faulty components and get them replaced |
| Washer won’t drain | Clogged drain pump
Clogged drain hose Faulty lid/door switch |
Make sure the drain pump and drain hose are unclogged and clean. In case of a defective lid/door switch, make a quick replacement |
| Washer won’t sense | Wrong setting
Stuck keypad Low water level Faulty timer Faulty water level sensor Faulty lid lock Faulty water inlet valve Faulty control board |
Choose the right setting, make sure the keypad remains unstuck, check the water level and improve it, and in case of faulty components make a replacement |
| Washer won’t spin fast enough | Laundry overload
Faulty lid Poor drainage Defective drive belt Loose drive belt Faulty water level switch |
Keep the laundry balanced, the faulty lid needs to be replaced, loose drive belts need to be tightened and faulty components should be replaced quickly |
| Washer won’t fill | Low water pressure
Defective water inlet valve |
Make sure to increase the water pressure and replace the defective water inlet valve |
| Washer won’t wash | Faulty lid switch
Faulty timer Faulty cycle selector Faulty drive motor Faulty drive belt Faulty water level switch |
Replace all the faulty parts |
| Washer stops working mid-cycle | Faulty door lock
Faulty water inlet valve Faulty main control |
Replace the faulty components |
| Washer won’t spin the clothes dry | Power failure
Poor drainage Unbalanced load Wrong spin selection |
Resolve the power issue, unclog the clogged components, balance the load and select the right spin cycle |
Maytag Bravos MCT washer problems with solutions:
The common Maytag Bravos MCT washer problems with solutions are as follows.
1. Washer won’t start
In case your machine doesn’t start, it could be due to the following reasons.
Inbound power failure
Check whether the breaker has been tripped or not. There could be a possibility that the socket starts malfunctioning. In this case, call an electrician and get it fixed. Inspect the power cord with the help of a multimeter and if it is faulty then replace it.
Blown thermal fuse
The thermal fuse will blow when the washer becomes overheated. First check the thermal fuse with a multimeter and if it shows the signs of damage then replace it.
Defective lid lock
If your washer has a defective lid lock then it will not allow the machine to run normally and smoothly. Test it with a multimeter and if it is faulty then get it replaced.
Dead control board
If the previous components are working perfectly fine then the problem might be in the control board. There is no solution other than replacing it.
2. Washer won’t agitate
Your washer won’t agitate due to the presence of these faulty components.
Drive belt
Having a defective drive belt will not move the drum and as a result the washer won’t agitate. You will have to replace the drive belt.
Door lock
Your washer will not work in its normal state until and unless you replace the faulty door locks.
Drive motor
The drive motor is responsible for the running of the drive belt. If the motor fails so does the belt and as a result the washer won’t agitate. Moreover, inspect the motor coupling and agitator assembly. In case of a potential fault, make a quick replacement.
Also Check: Correct Washing Machine Drain Pipe Height [Explained 2024]
Also Check: GE Washer Fills with Water then Stops [9 Fixations in 2024]
Also Check: GE vs Whirlpool Washing Machine [Which is Better in 2024]
Also Check: GE VS Samsung Washer [Comparison Which is Better in 2024]
3. Washer won’t drain
In case of an unsuccessful drainage, the possible reasons could be:
Faulty or clogged drain pump
The drain pump will struggle to pump the water out if it is clogged. In case it is defective, it will not pump the water at all so make a quick replacement.
Clogged drain hose
If the drain hose is clogged then it will not allow the water waste to pass through. So clear all the possible blockages.
Blocked coin trap
The washer won’t drain in case of a blocked coin trap. Make sure you clean it often.
Faulty lid/door switch
The washer won’t spin if the door switch is damaged. So replace it at your earliest.
4. Washer won’t sense
Your machine won’t sense due to the following reasons.
Wrong setting
Selecting the wrong setting might prevent your machine from running so make sure you choose the right setting.
Stuck keypad
Unstick the keypad gently to allow the washer to operate smoothly.
Reduced water level
Ensure that the water pressure is sufficient for the washer to receive enough water.
Clogged drains
Unclogging the drains will help the washer to start running.
Other components
If components like faulty timer, main control, water level sensor, water inlet valve or lid lock have become faulty then replace them as soon as possible.
5. Washer won’t spin fast enough
The washer might not spin fast enough due to:
Laundry overload
The laundry shouldn’t be overloaded otherwise the washer will spin slowly. Make sure to keep the laundry balanced.
Faulty lid
If there is a faulty lid present then it will not allow your washer to run at the maximum speed. If it is faulty then you need to replace it.
Poor drainage
You need to unclog the drainage so that the spin rate increases.
Defective drive belt
If the drive belt is loose or has gone faulty then you need to make a quick replacement because it might slow down the spin rate or might even stop the spin cycle. In this case, make the replacement as soon as possible.
Faulty water level switch
Take a multimeter and inspect the water level switch. If it doesn’t show any continuity then it means it is time for a replacement.
Also Check: How to Reset Maytag Bravos Washer [4 Unique Ways]
Also Check: Maytag Washer Fills with Water then Stops [Fixed 2024]
Also Check: Kenmore Washer Not Spinning Clothes Dry [6 Reasons]
Also Check: GE Washer Not Spinning Clothes Dry [6 Reasons]
Also Check: GE vs LG Washer [Comparison Explain Which is Better 2024]
6. Washer won’t fill
In case your washer stops filling, you need to look into the following things.
Low water pressure
If the water pressure is low then it will not allow the washer to fill. Measure the water pressure with a pressure gauge and adjust it to 20 PSI.
Faulty water inlet valve
The water inlet valve present in your washer will prevent the water pressure from rising. If the water pressure is low then it will slow down the filling.
7. Washer stopped working mid-cycle
If the washer stops spinning mid-cycle then you can check the following.
Faulty door lock
A faulty door lock will make sure to stop the washer mid-cycle. This will continue until you replace the lock.
Defective water inlet valve
You need to replace the defective water valve to stop your washer getting interrupted mid-cycle.
Faulty main control
If the issue is not in the above components then it means the main control has become faulty and it needs a quick replacement.
8. Washer won’t wash
If you come across a situation where the washer won’t wash then the reasons could be the following.
Faulty lid switch
A faulty lid switch will prevent your washer from working normally. Make a quick replacement.
Damaged timer
A damaged timer will prevent the motor from turning so you need to replace it.
Faulty cycle selector
Just like a damaged timer, a faulty cycle selector will also not allow the motor to turn. The only solution is to replace it.
Damaged drive belt
If the drive belt is broken then it will not allow the washer to spin, wash and agitate. It needs a replacement.
Damaged water level switch
A faulty water-level switch will not be able to control the water level resulting in many issues. So you need to buy a new one and get it replaced.
9. Washer won’t spin clothes dry
There could be many reasons if your washer isn’t spinning the clothes dry.
Power shortage or failure
If the power failure occurs mid-cycle then you need to make a reset.
Poor drainage
Poor drainage will keep the dirty water inside and won’t pump it out. Make sure you unclog the drains.
Unbalanced laundry
Make sure the loaded laundry is stable otherwise the unbalanced laundry will keep your clothes wet at the end of the cycle.
Unlevelled washer
Make sure the washer is present on the ground level.
Incorrect spin selection
You need to select the spin cycle that matches with your laundry. For bulk clothes you need to select the bulk selection.
10. Clogged fabric dispenser
After the usage, the fabric softener dispenser might not function properly due to the clogged dispenser. The fabric residues are left in the dispenser cup making the dispenser clogged. Make sure to clean the dispenser with hot water and then allow it to dry for some time.
Other ways
If your washer still doesn’t work even after trying out every mentioned solution then it is time to consider some other fixes.
- Enabling the diagnostic mode of your washer
- Resetting the washer
Enabling diagnostic mode:
To enable the diagnostic mode of your washer, follow the below steps.
- Plug in the washer
- Don’t turn on the indicators yet
- Find the cycle selector and turn it in the clockwise direction thrice
- Now again turn it in the anticlockwise direction for once and same for clockwise
- As soon as the indicator lights up, it will show that you have successfully entered the diagnostic mode
The advantage of enabling the diagnostic mode is that it will inform you about the potential error codes. These codes will tell you about the issues which your washer is currently facing.
Resetting the washer:
To get rid of any error code, the easiest solution would be to perform a reset. To do this, follow the below-mentioned steps.
- Unplug the washer
- Wait for about 30 minutes
- Re-plug the washer and see if the problems still exist or not
OR
- Plug in your washer
- Press the cancel/power button
- Go for a new cycle
- Now press pause/start to start the resetting process
Frequently Asked Questions:
How can I reset my Maytag washer?
You can reset the Maytag washer either by unplugging it for exactly 30 minutes or by pressing the cancel/power button. After this you will need to choose a cycle and then press pause/start button.
What could be the potential reasons for my Maytag washer to not spin?
The reasons that could prevent your washer from spinning are:
- Unbalanced load
- Laundry overload
- Unbalanced washer
My Maytag washer is not draining, why?
In case your Maytag washer is not draining you could check the pump. If the pump is faulty then of course the draining won’t be done. Similarly, check for the drains and if they are clogged, unclog them.
Ending words:
Let’s recap, you will be at ease if you first figure out the actual cause of your problem and then jump on to its fix. If you start applying every possible fix then it could become time consuming for you and could cause other problems as well.